Terhi 450 CC is the perfect companion if you are looking for a boat that will both take you to and from your summer house, out for leisurely rides with the family or for relaxing fishing trips.

Terhi 450 CC

This product is specially equipped.

Hide options ⇨
Telescopic paddle 100-157cm, white

Product ID: 7600-TER
A paddle which can be also used as a boat hook. Telescopic model with stepless adjustment. Material aluminium and plastic.
Rod holder for a rail, grey, Terhi

Product ID: 70060-TER
Adjustable, rod holder of very high quality. Made out of acid-resistant steel. Mounting on a Ø 25mm rail (i.e. requires the railings). Length of the tube 250 mm. Easy to mount and adjust. RAL7031 (grey).
Rowlock (pair)

Product ID: 700481-TER
Rowlocks for the oars, manufactured in Finland. The package includes two rowlocks. The oars do not require any drilled holes, as the rowlock is fastened around the shaft of the oar.
Rod holder for a rail, polished, Terhi

Product ID: 700600-TER
Adjustable, rod holder of very high quality. Material acid-proof steel . Mounting on Ø 25mm rail. Length of tube 250mm. Easy to mount and adjust.
Storage bin for a rail

Product ID: 69100-TER
Lightweight, plastic storage box onto the rail.
Cup holder to rowlock socket

Product ID: 70112-TER
Fasten the cup holder into the rowlock socket
Sunbed plywood parts 445/450

Product ID: 744509-TER
With these plywood parts you can modify the front part of the boat as a sun deck. The plywood parts are made of high-quality plastic-coated birch plywood. You can even increase comfort by acquiring cushion sets on the seats and sunbed plywoos parts. Suited for the Terhi 450 and its predecessor Terhi 445.
Console cover 475/450CC/Nordic C
Product ID: 55555-TER
Protective cover to be pulled over the steering console. Protects from dirt and rain and prevents for example rainwater from entering the instrument panel.
Transom transducer holder

Product ID: 70062-TER
For mounting the echo sensor, to be mounted on the transom, adjustable in height. Material aluminium.
Fishing arch, polished

Product ID: 700610-TER
Polished targa-arch for mounting on the bow rail pair. For models 475 BR/480, a mounting kit 700615-TER is also required. Acid-proof steel.
All-round pole light 360° long (to boat with stern canopy) white body

Product ID: 703570-TER
Plastic, all-round pole light to stern of the boat. Light colour white. If boat has a canopy, choose short all-round pole light (703571-TER).
All-round pole light 360° short (boat without stern canopy) black body

Product ID: 703571-TER
Plastic, all-round pole light to stern of the boat. Light colour white. If boat has a canopy, choose long all-round pole light (703570-TER).
Bow light, red/green 135mm black body
Product ID: 703575-TER
Light for the bow of the boat, red-green light.
Cushions 445/450

Product ID: 744501-TER
Cushions for the seats. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Sunbed cushions 445/450

Product ID: 744508-TER
Cushions for sunbed plywood parts. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Stern rail, polished (445 2016-/450)

Product ID: 7445020-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Side railing, pair, polished (445 ym.2016-/450)

Product ID: 7445200-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Bowrail (shark fin), pair, polished (445 ym.2016-/450)

Product ID: 7445550-TER
Bow rail made of acid-proof steel. Diameter ø25 mm. Makes boarding easier and provides safety.
Fishing arch aluminum, 6 rod holders + 4 x fasteners Ø25mm, requires handrailing

Product ID: 700613-TER
Aluminium targa arch with six rod holders. The package includes brackets.
Value pack 450 CC

Product ID: 78500-TER
Includes polished side rail pair, bowrail pair, low stern rail, console cover and storage box to a rail.
Canopy 450 CC

Product ID: 545013-TER
Harbor and driving canopy protects from wind, rain and sun in port and offshore. Small holes at the bottom of rear part of the canopy allow the use of the rear rail on the boat. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Storage cover 450 CC

Product ID: 545021-TER
For covering the boat when the boat is out of the water. The cover does not withstand the weight of snow.
Stern canopy 450 CC

Product ID: 545025-TER
A well-designed and high quality stern canopy increases comfort and value to your boating. Our boat canopies are designed with the different uses of boats in mind, so that they would serve the boat user the best way. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Terhi table

Product ID: 69103-TER
White, oval table with four cup holders. The package includes also a table leg and two bases for fitting the table (submersible and surface mounting).
Stern rail high, polished 445/450

Product ID: 7445021-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Seat padding set, thin, adhesive, seats, light grey 445/450

Product ID: 69106-TER
Thin, self-adhesive padding set for the plywood seats.
Flag pole

Product ID: 7410371-TER
Flagpole to the stern of the boat. Requires a flagpole holder 7410372-TER for installation .
Fastening bed for battery under front seat 450

Product ID: 748491-TER
Battery mounting kit in aluminium for the use of trolling motor in the bow. To be mounted under the front seat. The mounting plate allows the battery to be securely mounted under the front seat. Cable runs must be made through the front seat, sealing the sealing ring.
Harbor- & driving canopy 445/450 std/C/CC models (fits with high stern rail)
Product ID: 544514-TER
Harbor and driving canopy protects from wind, rain and sun in port and offshore. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Fastening bed for bow engine, plywood 450 FI-TRH50001J920 ->

Product ID: 7005009-TER
Plywood plate to provide rigid support for the trolling motor
Flag pole holder, black (surface mounting)

Product ID: 7410373-TER
Flagpole holder for flag pole. Aluminium, black-painted. Surface mounting.
Harbor cover 450 CC (stern rail)

Product ID: 545015-TER
Harbor cover protects the boat from dirt and rain while the boat is in port. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The cover arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Oars Sisukas 9´ 270 undrilled pair
Product ID: 74400811-TER
This forest friendly oar is manufactured out of flexible and light spruce and assembled from several parts that are glued together to form a solid piece. The small knot holes of the shaft does not affect the durability of the oar due to its multiple layer construction. Shaped handle. Finished with water-proof varnish. Storage and maintenance of oars: when not in use, it is recommended to store the oars in a dry place, protected from sunlight. The condition of the oars should be checked at regular intervals. If the oars are intact but the varnish surface is damaged, sand off the chipped varnish and apply 2-3 coats of urethane varnish to protect the oars.Length of oar: 9 feet / 270 cm.
Plywood seat, right 450 Sloep

Product ID: 7445095-TER
With this extra seat you will a U-shaped seating area in the bow. Check also the stylish cushion set 7445010-TER.
Seat padding set, thin, adhesive, for seats+sunbed plywood, dark grey 445/450

Product ID: 69108-TER
Thin padding set with self-adhesive backing for the plywood seats and sunbed plywood parts.
€ Request offer via email