Terhi 450 C is a true allrounder equipped with a practical side console.

Terhi 450 C

This product is specially equipped.

Hide options ⇨
Telescopic paddle 100-157cm, white

Product ID: 7600-TER
A paddle which can be also used as a boat hook. Telescopic model with stepless adjustment. Material aluminium and plastic.
Sunbed plywood parts 445/450

Product ID: 744509-TER
With these plywood parts you can modify the front part of the boat as a sun deck. The plywood parts are made of high-quality plastic-coated birch plywood. You can even increase comfort by acquiring cushion sets on the seats and sunbed plywoos parts. Suited for the Terhi 450 and its predecessor Terhi 445.
Rod holder for a rail, grey, Terhi

Product ID: 70060-TER
Adjustable, rod holder of very high quality. Made out of acid-resistant steel. Mounting on a Ø 25mm rail (i.e. requires the railings). Length of the tube 250 mm. Easy to mount and adjust. RAL7031 (grey).
Transom transducer holder

Product ID: 70062-TER
For mounting the echo sensor, to be mounted on the transom, adjustable in height. Material aluminium.
Console cover 445 C/450 C

Product ID: 544517-TER
Protective cover to be pulled over the steering console. Protects from dirt and rain and prevents for example rainwater from entering the instrument panel.
Storage cover 445 C/450 C

Product ID: 544521-TER
For covering the boat when the boat is out of the water. The cover does not withstand the weight of snow.
Stern canopy 445 C/450 C (side railing pair required)

Product ID: 544525-TER
A well-designed and high quality stern canopy increases comfort and value to your boating. Our boat canopies are designed with the different uses of boats in mind, so that they would serve the boat user the best way. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Bow canopy 445 STD/C, 450 STD/C/CC
Product ID: 544527-TER
The bow canopy protects passangers and stowage from wind, rain and sun. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Fishing arch, polished

Product ID: 700610-TER
Polished targa-arch for mounting on the bow rail pair. For models 475 BR/480, a mounting kit 700615-TER is also required. Acid-proof steel.
All-round pole light 360° long (to boat with stern canopy) white body

Product ID: 703570-TER
Plastic, all-round pole light to stern of the boat. Light colour white. If boat has a canopy, choose short all-round pole light (703571-TER).
All-round pole light 360° short (boat without stern canopy) black body

Product ID: 703571-TER
Plastic, all-round pole light to stern of the boat. Light colour white. If boat has a canopy, choose long all-round pole light (703570-TER).
Navigation light 360 deg. (Terhi 400)

Product ID: 703574-TER
Plastic, all-round pole light to stern of the boat. Light colour white.
Bow light, red/green 135mm black body
Product ID: 703575-TER
Light for the bow of the boat, red-green light.
Cushions 445/450

Product ID: 744501-TER
Cushions for the seats. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Sunbed and -cushions 445/450 (cushion set required)

Product ID: 744505-TER
Includes sunbed plywood parts and cushions which will be mounted on top of sunbed plywood parts with snap fastener. Plywood parts are made of plastic coated birch plywood. The use of cushios for sunbed plywood parts requires also seat cushion set on the boat. After use it is recommended to move cushions to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Sunbed cushions 445/450

Product ID: 744508-TER
Cushions for sunbed plywood parts. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Stern rail, polished (445 2016-/450)

Product ID: 7445020-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Side railing, pair, polished (445 ym.2016-/450)

Product ID: 7445200-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Bowrail (shark fin), pair, polished (445 ym.2016-/450)

Product ID: 7445550-TER
Bow rail made of acid-proof steel. Diameter ø25 mm. Makes boarding easier and provides safety.
Cup holder to rowlock socket

Product ID: 70112-TER
Fasten the cup holder into the rowlock socket
Fishing arch aluminum, 6 rod holders + 4 x fasteners Ø25mm, requires handrailing

Product ID: 700613-TER
Aluminium targa arch with six rod holders. The package includes brackets.
Bimini 1.5 - 1.7m grey (requires side rails)

Product ID: 700591-TER
Protects from sun and weather. Width 1.4m, mounting width 1.5-1.7m, canopy length 1.3m, maximum height 1.2m , minimum height 0.9m. The bimini folds neatly into the storage bag. The bimini arches do not fold down over the engine.
Bed for battery box 20,2x28,7cm 390/450/475 BR/480

Product ID: 74849-TER
Fastening bed for battery box, aluminium. Fits with battery boxes 74514-TER and 745149-TER.
Lid for rainwater drainage 445/450

Product ID: 7003460-TER
Lid for rainwater drainage prevents for example leaves to get into the draining tube when the boat is in the port or out of the water.
Terhi table

Product ID: 69103-TER
White, oval table with four cup holders. The package includes also a table leg and two bases for fitting the table (submersible and surface mounting).
Stern rail high, polished 445/450

Product ID: 7445021-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Seat padding set, thin, adhesive, seats, light grey 445/450

Product ID: 69106-TER
Thin, self-adhesive padding set for the plywood seats.
Value pack 450 C

Product ID: 78504-TER
Includes polished side rail pair, bowrail pair, low stern rail, console cover and storage box to a rail.
Flag pole

Product ID: 7410371-TER
Flagpole to the stern of the boat. Requires a flagpole holder 7410372-TER for installation .
Fastening bed for battery under front seat 450

Product ID: 748491-TER
Battery mounting kit in aluminium for the use of trolling motor in the bow. To be mounted under the front seat. The mounting plate allows the battery to be securely mounted under the front seat. Cable runs must be made through the front seat, sealing the sealing ring.
Backrest cushion to high stern rail 445/450

Product ID: 74450110-TER
The stern backrest cushion requires a high stern rail (7445021-TER) on the boat. Fastening of stern backrest cushions on the high stern rail with zip fastening. After use it is recommended to move cushion to a shelter from the rain.
Battery box 19x27x20cm, low lid

Product ID: 745149-TER
Plastic, low battery box with fastening strap and mounting parts.
Harbor- & driving canopy 445/450 std/C/CC models (fits with high stern rail)
Product ID: 544514-TER
Harbor and driving canopy protects from wind, rain and sun in port and offshore. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The canopy arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Fastening bed for bow engine, plywood 450 FI-TRH50001J920 ->

Product ID: 7005009-TER
Plywood plate to provide rigid support for the trolling motor
Flag pole holder, black (surface mounting)

Product ID: 7410373-TER
Flagpole holder for flag pole. Aluminium, black-painted. Surface mounting.
Oars Sisukas 9´ 270 undrilled pair
Product ID: 74400811-TER
This forest friendly oar is manufactured out of flexible and light spruce and assembled from several parts that are glued together to form a solid piece. The small knot holes of the shaft does not affect the durability of the oar due to its multiple layer construction. Shaped handle. Finished with water-proof varnish. Storage and maintenance of oars: when not in use, it is recommended to store the oars in a dry place, protected from sunlight. The condition of the oars should be checked at regular intervals. If the oars are intact but the varnish surface is damaged, sand off the chipped varnish and apply 2-3 coats of urethane varnish to protect the oars.Length of oar: 9 feet / 270 cm.
Plywood seat, right 450 Sloep

Product ID: 7445095-TER
With this extra seat you will a U-shaped seating area in the bow. Check also the stylish cushion set 7445010-TER.
Seat padding set, thin, adhesive, for seats+sunbed plywood, dark grey 445/450

Product ID: 69108-TER
Thin padding set with self-adhesive backing for the plywood seats and sunbed plywood parts.
€ Request offer via email