A trustworthy, easy and affordable allrounder for e.g.

Terhi 400 Verde

This product is specially equipped.

Hide options ⇨
Telescopic paddle 100-157cm, white

Product ID: 7600-TER
A paddle which can be also used as a boat hook. Telescopic model with stepless adjustment. Material aluminium and plastic.
Keel list 5 m / 32 mm (400/445/450/475/480)

Product ID: 70047-TER
Ideal for protecting the keel line of boat. Protects the whole keel as well as partly the bow. NOTE! One package of Terhi Fix 600g (72107-TER) is needed for the mounting of keel list.
Rowlock, open (pair)

Product ID: 70015-TER
Open rowlock pair for oars (max diameter of oar 53 mm). Fits in 17 mm base. Locks in the base of rowlock. Rowlock has a loop for attaching a safety cord of oar. Made of cast aluminium. Manufactured in Finland.
Rod holder for a rail, grey, Terhi

Product ID: 70060-TER
Adjustable, rod holder of very high quality. Made out of acid-resistant steel. Mounting on a Ø 25mm rail (i.e. requires the railings). Length of the tube 250 mm. Easy to mount and adjust. RAL7031 (grey).
Rowlock (pair)

Product ID: 700481-TER
Rowlocks for the oars, manufactured in Finland. The package includes two rowlocks. The oars do not require any drilled holes, as the rowlock is fastened around the shaft of the oar.
Rod holder for a rail, polished, Terhi

Product ID: 700600-TER
Adjustable, rod holder of very high quality. Material acid-proof steel . Mounting on Ø 25mm rail. Length of tube 250mm. Easy to mount and adjust.
Side rail pair, polished 385/390/400/440/480 C/SF

Product ID: 7407110-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Storage bin for a rail

Product ID: 69100-TER
Lightweight, plastic storage box onto the rail.
Cup holder to rowlock socket

Product ID: 70112-TER
Fasten the cup holder into the rowlock socket
Battery box 41x20x20cm, low lid

Product ID: 751044-TER
Plastic, low battery box for a bigger battery to rowing boats. Includes a fastening strap and mounting parts.
Battery box 19x27x20cm, low lid

Product ID: 745149-TER
Plastic, low battery box with fastening strap and mounting parts.
Terhi-storage box with slide rails

Product ID: 691001-TER
Lightweight plastic box with aluminium sliding rails. For storing small items. Mounting under a plywood seat. Includes mounting parts.
Pulling rope

Product ID: 7390320-TER
With the help of the rope handle (pulling rope) it is easier to pull the boat out of the water onto the beach. Easily attach the rope handle in the boweye.
Fore bulkhead under rear seat 400

Product ID: 74022-TER
With the fore bulkhead of rear seat, you can modify the lower part of the rear seat into a lockable storage area. The dark color of the bulkhead also provides a bit visibility protection.
Steering console excl.windscreen Terhi 400 boat grey

Product ID: 74080-TER
Includes steering console, steering wheel, steering cable and -drum, fore bulkhead of rear seat and screws for installation. Color boat grey. Also available in white (740801-TER).
Cleat Terhi 6, polished

Product ID: 710510-TER
Cleat 6", acid-proof steel, polished. Includes fastening screws.
Windscreen Terhi 400

Product ID: 740070-TER
Windscreen protects from water splashes and above all from cold wind.
Main switch and battery box (400 std/400 C/445 C/450 C)

Product ID: 744592-TER
Battery box equipped with main switch. Suits for Terhi 400, Terhi 400 C, Terhi 445 C and Terhi 450 C boats. Mounting under the rear seat.
Harbor cover 400/400 C

Product ID: 54051-TER
Harbor cover protects the boat from dirt and rain while the boat is in port. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The cover arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Cushions 400

Product ID: 74005-TER
A stylishly dual-tone grey cushion set for the Terhi 400 / 400 CC models. The set includes the cushion for the seat in the very bow, the middle bench and the stern bench.We recommend stowing away the cushions in a dry space after use, to prolong the lifespan of the cushions.Note! The placements of the snap buttons (for fastening the cushions to the benches) might vary between production batches.
Navigation light 360 deg. (Terhi 400)

Product ID: 703574-TER
Plastic, all-round pole light to stern of the boat. Light colour white.
Bow rail (shark fin), polished 400

Product ID: 740470-TER
Bow rail made of acid-proof steel. Diameter ø25 mm. Makes boarding easier and provides safety.
Adjustable safety ladder

Product ID: 747549-TER
A swimming/safety ladder with a foldable stepping part. Four steps of which the lowest step is telescopic for practical length adjustment. In the upraised position the step part is fastened to the frame with a plastic clip. Mounting on stern transom.Suitable for the Terhi 400, 400 Verde and 400 CC models.
Bimini 1.3 - 1.5m grey series (requires siderails)

Product ID: 700590-TER
Protects from sun and weather. Width 1.3-1.5m, canopy length 1.3m, max height 1.2m , min height 0.9m. The bimini folds neatly into the storage bag. The bimini arches do not fold down over the engine.
eTerhi kit for Torqeedo+400/440

Product ID: 75133-TER
Solar charger set for charging Torqeedo Travel electric outboard in Terhi 400 or Terhi 440 boat. The set includes 45W solar panel, 12 V charging cable, 12 V female connector and e-sticker.
Steering console excl.windscreen Terhi 400 pure white

Product ID: 740801-TER
Includes steering console, steering wheel, steering cable and -drum, fore bulkhead of rear seat and screws for installation. Color white. Also available in boat grey -color (74080-TER).
Fastening bed for bow engine, plywood 400
Product ID: 7005010-TER
The mounting bed allows installation of a bow engine on Terhi 400 models for fishing. The mounting plate is made of plywood.
Cushion for backrest rail 71556-TER 400 CC
Product ID: 71557-TER
This cushion requires a backrest rail (71556-TER) on the boat. Fastening on the backrest rail with a zipper. After use it is recommended to move cushion to a shelter from the rain.
Seat padding set, thin, adhesive, for seats, 4-part, dark grey 400
Product ID: 69110-TER
A self-adhesive cushion set for the plywood seats of Terhi 400 models. The set also includes a thin cushion for the front section of the Terhi 400 CC boat’s helm console.
€ Request offer via email