This stylishly green row boat is easy to steer and extremely comfortable to row, at the same time as it goes well also with a small outboard engine.

Terhi 390 Green

This product is specially equipped.

Hide options ⇨
Telescopic paddle 100-157cm, white

Product ID: 7600-TER
A paddle which can be also used as a boat hook. Telescopic model with stepless adjustment. Material aluminium and plastic.
Paddle 140 cm

Product ID: 7616-TER
A paddle laminated from clean timber with a shaped grip. Suitable both for canoes and boats. Finished with a special varnish.
Rowlock, open (pair)

Product ID: 70015-TER
Open rowlock pair for oars (max diameter of oar 53 mm). Fits in 17 mm base. Locks in the base of rowlock. Rowlock has a loop for attaching a safety cord of oar. Made of cast aluminium. Manufactured in Finland.
Rowlock (pair)

Product ID: 700481-TER
Rowlocks for the oars, manufactured in Finland. The package includes two rowlocks. The oars do not require any drilled holes, as the rowlock is fastened around the shaft of the oar.
Rod holder for a rail, polished, Terhi

Product ID: 700600-TER
Adjustable, rod holder of very high quality. Material acid-proof steel . Mounting on Ø 25mm rail. Length of tube 250mm. Easy to mount and adjust.
Side rail pair, polished 385/390/400/440/480 C/SF

Product ID: 7407110-TER
Boat railings improve safety as it is easier to move in a boat by holding on to rails and passangers can hold on to rails when the boat is moving. It is also easy to attach various types of equipment, e.g. rod holders, to the rails. Ralings also change the appearance of the boat.
Cup holder to rowlock socket

Product ID: 70112-TER
Fasten the cup holder into the rowlock socket
Battery box 41x20x20cm, low lid

Product ID: 751044-TER
Plastic, low battery box for a bigger battery to rowing boats. Includes a fastening strap and mounting parts.
Battery box 19x27x20cm, low lid

Product ID: 745149-TER
Plastic, low battery box with fastening strap and mounting parts.
Terhi-storage box with slide rails

Product ID: 691001-TER
Lightweight plastic box with aluminium sliding rails. For storing small items. Mounting under a plywood seat. Includes mounting parts.
Pulling rope

Product ID: 7390320-TER
With the help of the rope handle (pulling rope) it is easier to pull the boat out of the water onto the beach. Easily attach the rope handle in the boweye.
Cleat 102mm 390/440

Product ID: 70063-TER
Cleat 102 mm, acid-proof steel, polished. Includes fastening screws.
Bed for battery box 20,2x28,7cm 390/450/475 BR/480

Product ID: 74849-TER
Fastening bed for battery box, aluminium. Fits with battery boxes 74514-TER and 745149-TER.
Keel list 385/390 cut-to-shape

Product ID: 700474-TER
Ideal for protecting the keel line of boat. Protects the whole keel as well as partly the bow. NOTE! Two packages of Terhi Fix 600g is needed for the mounting of keel list.
Bow rail (shark fin), polished 390

Product ID: 739031-TER
Bow rail made of acid-proof steel. Diameter ø25 mm. Makes boarding easier and provides safety.
Pulling handle 390

Product ID: 739032-TER
With the help of the pulling bar it is easier to pull the boat out of the water to the beach. Mounting in the bow. Acid-proof steel.
Strainer 390

Product ID: 739033-TER
Strainer prevents for example leaves to get into the draining tube when the boat is in the port or out of the water.
Harbor cover 390

Product ID: 739034-TER
Harbor cover protects the boat from dirt and rain while the boat is in port. The canopy is not suitable for storing the boat outdoors in the winter. The fabric part of the canopy should be stored in a warm, dry place when the boat season has ended. The cover arches are not designed to withstand the weight of snow. Do not use the arches to support a winter cover.
Cushions 390

Product ID: 739035-TER
Cushions for the seats. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
Mounting bed for bow engine 390

Product ID: 739036-TER
Mounting bed for bow engine enables the use of an electric bow engine in Terhi 390 boat. Material aluminium.
Mid seat with storage space 390 PE

Product ID: 700039-TER
A rotationally molded spacious seat/storage box, which can be placed as a middle bench instead of the standardly fitted bench out of plywood. The seat/storage box is removable, lockable and can also accommodate a standard 110 AH battery. A small storage compartment and cup holder on the surface of the seat add to the usability, as your water bottle and cell phone are well within reach at all times. There is also a drainage tube for condensation water on the front side of the seat box. Both the seat/ storage box and the standardly fitted traditional middle bench, can be attached to three different mounting points, one of which has a locking option.
Rear seat bulkhead kit 390

Product ID: 739221-TER
With the bulkhead set of rear seat, you can modify the lower part of the rear seat into a lockable storage area. The dark color of the bulkhead also provides a bit visibility protection.
eTerhi retrofit kit for Torqeedo 390
Product ID: 75135-TER
Solar charger set for charging Torqeedo Travel electric outboard in Terhi 390 boat. The set includes 45W solar panel, 12 V charging cable, 12 V female connector and e-sticker.
Bed for battery box 18,8x40cm 390/445/450

Product ID: 748496-TER
Fastening bed for bigger battery box, aluminium. Fits with battery box 751044-TER and battery box with main switch 744592-TER.
Solar kit to 390
Product ID: 75129-TER
Includes 45W solar panel, 8A charge controller, battery box, battery box cover and cables.
Sunbed cushion 390

Product ID: 739037-TER
Foldable cushion for sunbed plywood parts. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches. The faded cushions shown in the picture are part of the boat's cushion set.
Cushion for middle bench with storage space 390/Saiman

Product ID: 739040-TER
Cushion for the middle bench with a storage space. After use it is recommended to move to a shelter from the rain. Note! The fastening points of the cushion may vary between production batches.
Sunbed plywood parts 390

Product ID: 739038-TER
With these plywood parts you can modify the front part of the boat as a sun deck. The plywood parts are made of high-quality plastic-coated birch plywood. You can even increase comfort by acquiring cushion sets on the seats and sunbed plywoos parts.
Sunbed and -cushion 390 (cushion set required)

Product ID: 739039-TER
Includes sunbed plywood parts and a foldable cushion which will be mounted on top of sunbed plywood parts with snap fastener. Plywood parts are made of plastic coated birch plywood. The use of cushion for sunbed plywood parts requires also seat cushion set on the boat. After use it is recommended to move cushions to a shelter from the rain. Note! The fastening points of the cushions may vary between production batches.
€ Request offer via email